TABLE OF CONTENTS
1.
GENERAL
Button Locations ............................................................. 3
Setting the Clock ............................................................. 3
Installation ....................................................................... 4
Connections ..................................................................... 5
2.
......................................................... 8
3.
4.
Tuner Section .................................................................. 13
5.
5-3. Schematic Diagram - MAIN Section (1/2) - ................. 21
5-4. Schematic Diagram - MAIN Section (2/2) - ................. 23
5-6. Schematic Diagram - PANEL Section - ....................... 27
6.
7.
....................... 12
................................................ 33
............................... 39
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
- 2 -