TABLE OF CONTENTS
1.
Setting the Clock ............................................................. 4
Installation ....................................................................... 5
Connections ..................................................................... 6
2.
......................................................... 9
3.
4.
5.
Test Mode ........................................................................ 14
Tuner Section .................................................................. 15
6.
6-4. Printed Wiring Board –PANEL Section– ...................... 29
6-5. Schematic Diagram –PANEL Section– ......................... 31
7.
8.
........... 11
....................... 14
................................................ 35
............................... 38
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚ C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
– 2 –