Specifications - Roland XC-540 User Manual

8-5 Specifications

Printing/cutting method
Acceptable media widths
Printing/cutting width (*1)
Ink cartridges Types
Color
Printing resolution (printing-dot resolu-
tion)
Acceptable tool
Cutting speed
Blade force
Blade offset compensation
Software resolution (when cutting)
Distance accuracy (when printing) (*2)
(*3)
Distance accuracy (when cutting) (*3)
Repetition accuracy (when cutting) (*3)
(*4)
Alignment accuracy for printing and cut-
ting (*3) (*5)
Alignment accuracy for printing and cut-
ting when reloading media (*3) (*6)
Dryer unit (*7)
Ink-fixing device (*7)
Take-up system Roll outer diameter all-
owing take-up
Weight allowing take-up
Interface
Power-saving function
Power supply Voltage and frequency
Required power capac
ity
Power consumption During operation
Sleep mode
Acoustic noise level During operation
During standby
Dimensions (with stand)
Weight (with stand)
Environment Power on (*8)
Power off
Included items
148 Chapter 8 Appendix
Piezo ink-jet method/media-moving method
260 to 1,371 mm (10-1/14 to 54 in.)
Maximum 1,346 mm (53 in.)
ECO SOL MAX 220-cc cartridge / 440-cc cartridge
Six colors (cyan, magenta, yellow, black, light cyan, light magenta) or
Four colors (cyan, magenta, yellow, and black)
Maximum 1,440 dpi
Special blade for CAMM-1 series
10 to 600 mm/s (10 to 300 mm/s in media-feed direction)
30 to 300 gf
0.000 to 1.500 mm (0 to 0.0591 in.)
0.025 mm/step (0.000984 in./step)
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CALI-
BRATION] - [CUTTING ADJ.] has been made): Error of less than ±0.2% of
distance traveled, or ±0.1 mm, whichever is greater
±0.1 mm or less
±0.5 mm or less
Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater
Heating type, setting range for the preset temperature: 30 to 55°C (86 to
130°F)
Print heater / preheater, setting range for the preset temperature: 30 to 50°C
(86 to 122°F)
Maximum 180 mm
Maximum 30 kg
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep feature (compliant with the International ENERGY STAR®
Office Equipment Program)
AC 100 to 120 V ±10%, 50/60 Hz or AC 220 to 240 V ±10%, 50/60 Hz
13 A (100 to 120 V) or 7 A (220 to 240 V)
Approx. 1,600 W
Approx. 47 W
64 dB (A) or less (according to ISO 7779)
45 dB (A) or less (according to ISO 7779)
2694 (W) x 1103 (D) x 1260 (H) mm (106-1/8 (W) x 43-7/16 (D) x 49-5/8 (H)
in.)
197 kg (434.3 lb.)
Temperature: 15 to 32ºC (59 to 90ºF) (20ºC [68ºF] or more recommended),
humidity: 35 to 80% (no condensation)
Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80% (no condensation)
Exclusive stands, power cord, blade, blade holder, media clamps, replace-
ment blade for separating knife, cleaning kit, software RIP, User's Manual,
etc.
XC-540