Matrox Monarch HDX User Manual page 58

42
Setting the device date and time
You can set the date and time manually or automatically by using an NTP server.
¡ Important To save changes made in the Date and Time tab, you must click
the Apply button. A Monarch HDX hardware reboot is required to apply the
changes. If you leave the Date and Time tab before clicking Apply , all changes
will be lost.
1
2
3
*Setting the date and time automatically requires a local or public NTP server address. An
Internet connection is required to use a public NTP server.
Chapter 4, Using the Command Center
Manually
Select Manual .
Set the Time , and enter a Date in
the format DD/MM/YYYY, or
click to select a date from the
calendar.
Click Apply . You'll be notified
that Monarch HDX will be
rebooted in order to apply the
changes.
Automatically*
Select Automatic .
1
Enter a local or public NTP server
2
address. The default NTP server
address is time.nrc.ca.
Select a Time zone from the list.
3
The current date and time
associated with the selected NTP
server and time zone are displayed
next to Current date and time .
Click Apply . You'll be notified
4
that Monarch HDX will be
rebooted in order to apply the
changes.