Matrox Monarch HDX User Manual page 53

Disabling the front panel buttons on the Monarch HDX
device
You can disable the encoder control buttons on the Monarch HDX device to
prevent someone from inadvertently switching inputs or stopping a streaming or
recording session. This option only applies to the Monarch HDX you are
connected to, and not other Monarch HDX devices you may be controlling.
° To disable the encoder buttons:
In the Command Center, click Device > Control .
1
For more information, see
Select Disable front panel buttons on this Monarch HDX device .
2
The input select and encoder buttons on the Monarch HDX device are disabled.
¦ Note This button disable feature is off by default and, when required, would
also need to be performed after a factory reset.
Disabling the preview
When the Monarch HDX is idle and you do not want to display what the
camera/input is sending the device, you can disable the preview of what will be
captured or streamed by selecting Disable preview stream (see
the input" on page
Enabling multi-device control
Monarch HDX allows you to start and stop the streaming and recording for itself
and four other Monarch devices on the network at the same time (see
multi-device control"
Each device streams and records the input source connected to its HDMI input
based on its own stream and record settings. To control multiple devices, you
must use the control buttons (see
"Accessing the Command Center"
23 for more information).
on page 37).
"Command Center control buttons"
37
on page 19.
"Previewing
"Enabling
on page 22)
Device page