Getting Started; Battery Installation - AT&T EP562 User Manual

Getting started

Battery installation

Install the battery as shown below. After installing the battery,
you need to register the handset with the telephone base (page
4). Once registered, you can make and receive calls. For optimal
performance, charge the handset battery for at least 6 hours
before use (page 3).
Step 1
Press the tab and
slide the battery
compartment
cover downwards.
IMPORTANT INFORMATION
• Use only the battery supplied with this product. To order a
replacement battery (AT&T model 03, part number
89-0429-00-00) or equivalent, visit our website at
www.telephones.att.com, or call 1 (800) 222-3111.
In Canada dial 1 (866) 288-4268.
Step 2
Insert the supplied
battery as indicated.
Insert the top edge
(contacts and tab)
in first, then push
downwards on the
lower portion of the
battery.
2
Step 3
Align the cover
flat against
the battery
compartment
cover, then slide
it upwards until
it clicks into
place.