Canon PRO-100S series Online Manual page 341

Note
• You can also set monochromatic color tones by clicking the Quick Setup tab, and then choosing
Color/Intensity Manual Adjustment under Additional Features.
9. Complete the setup
Click OK on the Main tab.
Then when you execute printing, the document is printed with the tone that was adjusted by the pattern
print function.
Important
• When Print a pattern for color adjustment is selected on the Color Adjustment tab, the following
items are grayed out and cannot be set:
• Preview before printing on the Main tab
• Stapling Side and Specify Margin... on the Page Setup tab (When Duplex Printing is set, only
Stapling Side can be set.)
• You can print a pattern only if the Page Layout setting on the Page Setup tab is Normal-size or
Borderless.
• When the Black and White Photo Print check box on the Main tab is not selected, Tone, X and Y
(monochrome adjustment) cannot be set.
• Depending on your application software, this function may not be available.
Related Topics
Adjusting Color Balance
Adjusting Intensity
Adjusting Contrast
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
341