Canon PRO-100S series Online Manual page 137

4. Place the disc tray on the disc tray guide.
Important
• Do not attach the disc tray while the printer is operating (the POWER lamp is flashing).
Note
• The disc tray may be ejected during preparation by the printer for printing. Wait until the POWER
lamp stays lit after flashing, then follow the on-screen instructions to attach the disc tray.
5. Insert the disc tray straight until the arrow (
the arrow ( ) on the disc tray.
Important
• Do not insert the disc tray beyond the arrow (
) on the disc tray guide is almost aligned with
) on the disc tray guide.
137