Right Side - HP Pro x2 612 G1 Maintenance And Service Manual

Item
(3)
(4)
(5)

Right side

Item
(1)
(2)
(3)
12 Chapter 2 External component identification
Component
DisplayPort
USB 3.0 charging (powered) port
Memory card reader
Component
Audio-out (headphone)/Audio-in (microphone)
jack
Docking connector
USB 3.0 port
Description
● Blinking amber: A battery that is the only available power
source has reached a low battery level. When the battery
reaches a critical battery level, the battery light begins
blinking rapidly.
●
Off: The battery is fully charged.
Connects an optional digital display device, such as a high-
performance monitor or projector.
Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub. Standard USB ports
will not charge all USB devices or will charge using a low current.
Some USB devices require power and require you to use a
powered port.
NOTE: USB charging ports can also charge select models of cell
phones and MP3 players, even when the computer is off.
Reads data from and writes data to memory cards such as SD.
Description
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable.
WARNING! To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset. For
additional safety information, see the Regulatory, Safety and
Environmental Notices
NOTE: When a device is connected to the jack, the computer
speakers are disabled.
NOTE: Be sure that the device cable has 4-conductor connector
that supports both audio-out (headphone) and audio-in
(microphone).
NOTE: Stand-alone microphones and headphones with
separate microphone jacks are not supported.
Connects the tablet to the keyboard base.
CAUTION: To prevent damage to the docking connector, do not
touch the connector when the tablet is detached from the
keyboard base.
Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub.