AT&T EL41108 User Manual page 45

At&t 5.8 ghz cordless telephone with caller id/call waiting user's manual
Hide thumbs Also See for EL41108:
Table of Contents

Advertisement

Appendix C
Troubleshooting
Common cure
for electronic
equipment.
• If you subscribe to high-speed Internet service (Digital
Subscriber Line - DSL) through your telephone line, you
must install a DSL filter between the telephone base
and the telephone wall jack (see page 6). The filter will
prevent noise and caller ID problems caused by DSL
interference. Please contact your DSL service provider
for more information about DSL filters.
• If the telephone is not responding normally, try putting
the cordless handset in the telephone base. If it does not
seem to respond, try the following (in the order listed):
1. Disconnect the power to the telephone base.
2. Disconnect the battery on the cordless handset.
3. Wait a few minutes before connecting power to the
telephone base.
4. Re-install the battery and place the cordless handset
into the telephone base.
5. Wait for the cordless handset to synchronize its
connection with the telephone base. Allow up to one
minute for this to take place.
41

Advertisement

Table of Contents
loading

Table of Contents