Table of Contents
Advertisement
Getting started
Installation options
Wall mount to desktop installation
To change the telephone base from the wall mount position to desktop
position, make sure that you first unplug the power adapter and telephone
line cord from the wall outlets before you begin.
1. Slide the telephone base
upwards, then pull the
telephone base away from
the wall off of the mounting
studs.
2. Unplug the power adapter
and the telephone line cord
from the electrical outlet and
the telephone jack.
3. Plug the telephone line cord
into the telephone base and
telephone wall jack, then plug
the power adapter plug into
the telephone base and a
power outlet not connected
to a wall switch.
2
8
1
Mounting
studs
Advertisement
Table of Contents
