Symbol PDT 7200 Series Quick Reference Manual page 10

P D T
3. On twist lock type battery packs, turn the lock to the 12
o'clock position to remove the battery pack.
4. Insert a new or fully recharged battery pack into the handle.
On squeeze-to-release type battery packs, make sure the bat-
tery latch engages. On twist lock type battery packs, turn the
lock to the 6 o'clock position to lock the battery pack.
5. Verify that the battery latch is properly engaged.
Squeeze-to-Release Type
1. Squeeze at
these two
points
Note: If the battery latch is not closed, the terminal does not
operate.
Caution: Do not expose the battery pack to temperatures over
140°F (60°C).
Do not disassemble, incinerate, or short circuit the battery pack. If
you do not replace a discharged battery pack within 5 minutes, data
may be lost.
7 2 0 0
Battery Pack ejects
downwards
2. Slide Latch
8
S e r i e s
Twist Lock Type
Locked
Unlocked