D-Link AirPlus Xtreme G DWL-2100AP User Manual page 72

Troubleshooting (continued)
8. Resetting the DWL-2100AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may choose
to Reset the DWL-2100AP to the factory default settings.
To hard-reset the D-Link DWL-2100AP to the Factory Default Settings, please do the
following:
Reset
 Locate the Reset button on the back of the
DWL-2100AP.

Use a paper clip to press the Reset button.

Hold for about 5 seconds and then release.

After the DWL-2100AP reboots (this may take a few
minutes) it will be reset to the factory Default settings.
72