D-Link AirPlus Xtreme G DWL-2100AP User Manual page 46

Using the AP Manager (continued)
Firmware
You can upgrade the firmware by clicking on
this button after selecting the device(s).
To upgrade the firmware:
• Download the latest firmware upgrade from http://support.dlink.com to an easy to
find location on your hard drive.
• Click on the firmware button as shown above.
• A popup window will appear. Locate the firmware upgrade file and click Open.
IMPORTANT! DO NOT DISCONNECT POWER FROM THE UNIT WHILE THE FIRMWARE IS
BEING UPGRADED.
System Settings
You can customize the basic System Settings for
the DWL-2100AP by clicking on this button.
• Access Password: This sets the admin password for the
selected device(s).
• Auto Refresh: This setting allows you to enable auto
refreshing of the network device list. By default this option
is disabled. If you choose to enable it, you must enter the
refresh interval in seconds.
All other settings on this screen should
be left at the default setting.
46