Storing The Power-Up Configuration; Recalling The Power-Up Configuration - Fluke 8845A User Manual

4. To store the present Meter configuration in one of the first four memory locations,
press the appropriate soft key. If you want to store the present Meter configuration in
a location other than the first four locations, press the MORE soft key.
The display indicates the next available memory location. If all configuration
memory locations are filled, the Meter will always indicate memory location 10.
5. To adjust the display to the desired memory location, press either <-- or --> to
select a specific digit.
6. With the digit selected, press the soft key labeled -- to decrement the digit or ++ to
increment the digit.
7. With the preferred memory location set, press the ENTER soft key to store the Meter
configuration.

Storing the Power-up Configuration

To store the Meter's present configuration as a power-up configuration:
1. Press M.
2. Press the STORE CONFIG softkey.
3. Press the STORE POWER-UP softkey.
The Meter configuration stored as a power-up configuration will be set whenever the
Meter is powered on.
LAN port remote settings (address, hostname, DHCP, mask, etc.) are saved
separately when selected in each instrument, and are not included in
individually stored/copied configurations.

Recalling the Power-up Configuration

In addition to having the power-up configuration to set up the Meter at power on, the
power-up configuration can be recalled through the front-panel keys. To recall the power-
up configuration:
1. Press M.
2. Press the RECALL POWER-UP softkey.
3. Press the RECALL CONFIG softkey.
The RECALL POWER-UP softkey will only appear when a power-up
configuration has been saved in the Meter's memory.
Note
RECALL CONFIG
1.4748
RECALL RECALL
USB INT MEM
F1 F2 F3
Note
Controlling Trigger Functions
F4 F5
Front-Panel Operation
caw063.eps
3
3-21