Connecting A Bluetooth Phone - Toyota Touch & Go Owner's Manual

Touch_Go_Plus_OM20B71E.book Page 153 Thursday, September 20, 2012 12:03 PM
1. BASIC INFORMATION BEFORE OPERATION
3. CONNECTING A Bluetooth
CONNECTING A Bluetooth
PHONE
In order to use the hands-free system,
it is necessary to pair the phone and
connect the phone's profile (HFP) with
the system. (In this manual, pairing re-
fers to a Bluetooth
with the system. Connecting refers to
the paired device's profile(s) being
connected to the system.)
Once the profile has been connected,
hands-free calls can be made.
If you have not yet connected any
®
Bluetooth phones with phone profile
(HFP), you must first connect your
phone with
according to the following procedure.
Connect your Bluetooth
phone profile (HFP) after bringing the
vehicle to a complete stop.
See "Bluetooth
193 of additional registration when reg-
istering.
Display audio_Ext_EE
®
®
device connecting
phone profile (HFP)
®
phone with
®
SETTINGS" on page
®
PHONE
CONNECTING A Bluetooth
PHONE
CONNECTING FROM THE SYSTEM
1
Press the button.
2 ∗
Touch "Bluetooth Setup".
3
Touch "Search for Bluetooth
es".
®
When a Bluetooth device is currently
connected, a pop-up window is displayed.
To disconnect it, touch "Yes".
∗
: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
®
5
∗
devic-
153