Installing The Throttle Body Joints; Installing The Air Filter Case - Yamaha 2014 MT-07 Service Manual

c. Connect the pressure gauge "3" and adapter
"4" to the fuel hose "2".
Pressure gauge
90890-03153
Pressure gauge
YU-03153
Fuel pressure adapter
90890-03176
Fuel pressure adapter
YM-03176
3
d. Start the engine.
e. Measure the fuel pressure.
Fuel line pressure at idling
300–390 kPa (3.0–3.9 kgf/cm²,
43.5–56.6 psi) / Regulated pres-
sure 324 kPa (3.2 kgf/cm², 47.0
psi)
Faulty → Replace the fuel pump.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
3. Install:
• Fuel tank
Rear fuel tank bracket bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Refer to "FUEL TANK" on page 7-1.
• Fuel tank front cover
• Fuel tank center cover
• Fuel tank cover (left)
• Fuel tank cover (right)
2
4
2
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
• Fuel tank top cover
Refer to "GENERAL CHASSIS (4)" on page
4-11.
• Rider seat
Refer to "GENERAL CHASSIS (1)" on page
4-1.
EAS30937

INSTALLING THE THROTTLE BODY JOINTS

1. Install:
• Throttle body joints "1"
TIP
Be sure to install the throttle body joints "1" as
shown in the illustration.
a
A
45˚
a. #1 cylinder
b. #2 cylinder
A. Left
B. Right
EAS31092

INSTALLING THE AIR FILTER CASE

1. Install:
• Air filter case joint clamps "1"
TIP
▲▲▲
• Align the projection "a" on the air filter case joint
with the slot "b" in the air filter case joint clamp.
• Face the screw head "c" of the air filter case
joint clamp outward.
7-17
THROTTLE BODIES
Throttle body joint clamp screw
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
1
70˚
Air filter case joint clamp screw
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
b
B