Installing Add-On Cards - ECS Z170-CLAYMORE User Manual

2-4-4. Installing Add-on Cards

The slots on this motherboard are designed to hold expansion cards and connect
them to the system bus. Expansion slots are a means of adding or enhancing the
motherboard's features and capabilities. With these efficient facilities, you can
increase the motherboard's capabilities by adding hardware that performs tasks
that are not part of the basic system.
PCIEX16_1~5 Slots The PCI Express x16 slots are used to install an external PCI
M2_2280M Slot
14
Express graphics card that is fully compliant to the PCI Express
Base Specification revision 3.0.
The M2_2280M slot is M.2 slot for 2242/2260/2280 SSD card
installing. It will provide high transfer performance than
original SATA interface.
Before installing an add-on card, check the documentation for
the card carefully. If the card is not Plug and Play, you may have
to manually configure the card before installation.
Z170-CLAYMORE USER MANUAL