ECS Z170-CLAYMORE User Manual page 58

Turbo Boost (Enabled)
This item allows you to enable or disable turbo boost.
Power Limit 1/2 Override (Enabled)
Use these items to enable or disable the Power Limit 1/2 Override. If these options
are disabled, BIOS will program the default values for Power Limit 1/2.
Power Limit 1/2 Value (Maximum)
Use these items to control the limit of the TDP. These are for Turbo mode.
Power Limit 1 Window (8)
Power limit 1 Time Window value in seconds. The value may vary from 0 to 128. If the
value is 0, default values will be programmed (28 sec for Mobile and 1 sec for
Desktop). Indicates the time window over which TDP value should be maintained.
Power Limit 3/4 Settings
Use these items to enable or disable the limit 3/4 override. If these options are
disabled, BIOS will leave the default values for power limit 3/4 and power limit 3/4
time window.
Peformance Mode (Boost)
Use this item to select the performance state that the BIOS will set before OS handoff.
TDP Lock (Disabled)
This item allows you to enable or disable the Package TDP lock.
CPU Ratio (35)
This item allows you to control non turbo CPU ratio.
Core 1 /2 /3 /4 Ratio Limit (39/38/37/36)
These items show the Core Ratio Limit Value.
Press <Esc> to return to the M.I.B. X Menu page.
Z170-CLAYMORE USER MANUAL
52