ECS Z170-CLAYMORE User Manual page 23

1. USB3F: Front Panel USB 3.0 Header
This Motherboard implements one USB 3.0 header supporting 2 extra front USB 3.0
ports, which delivers 5Gb/s transfer rate.
Please make sure that the USB cable has the same pin assignment as
indicated above. A different pin assignment may cause damage or system
hang-up.
2. SATA3_1~4: Serial ATA Connectors
SATA3_1~4 connectors are used to support the Serial ATA 6Gb/s device, simpler disk
drive cabling and easier PC assembly. It eliminates limitations of the current
Parallel ATA interface. But maintains register compatibility and software
compatibility with Parallel ATA.
The gray SATA3_6 connector will become unavailable when eSATA connec-
tor is used.
Z170-CLAYMORE USER MANUAL
17