Privacy Masking Tab; Day/Night Tab - Sony SNC-CH115 User Manual

Software version 1.7
Hide thumbs Also See for SNC-CH115:
Table of Contents

Advertisement

Privacy masking tab

Using the privacy masking enables you to hide images
by masking specified parts of the images when
streaming.
Preview screen
This screen is for monitoring images and configuring
privacy masking.
For details on each button, refer to the Control bar of the
Plug-in free viewer (page 24).
Position
Allows you to delete privacy masks one-by-one or all at
one time.
After completing the configuration, register by clicking
OK.
Clear: Click the button to delete the privacy mask set.
All clear: Click the button to delete all privacy mask.
Color
Specify the color of privacy masks. This setting is
common to every privacy mask.
The colors used are as follows:
Black, Gray1, Gray2, Gray3, Gray4, Gray5, Gray6,
White, Red, Green, Blue, Cyan, Yellow, Magenta
Setting a privacy mask
Operate according to the following procedure to set a
privacy mask in the position of your choice:
1
Face the camera to the position where you want to
set a privacy mask using the control button on the
preview screen.
2
Specify the privacy mask area by dragging the
mouse on the preview screen.
3
Select the number to register from the Position
drop-down list.
42
Setting the Camera Image — Camera Menu
4
Select the color of the mask from the Color drop-
down list.
Note
The color is common to every privacy mask. The
color selected last is applied.
5
Click OK.
The mask is displayed on the preview screen.
OK/Cancel
See "Buttons common to every menu" on page 32.

Day/Night Tab

Use this tab to set the day/night function of the camera.
Display sample: SNC-CH160
Preview screen
This screen is for monitoring images and configuring
day/night settings.
For details on each button, refer to the Control bar of the
Plug-in free viewer (page 24).
Day/Night mode
Select the day/night mode from among four modes.
Auto: Normally works in day mode; switches
automatically to night mode in a dark place.
Threshold: Set the brightness to High or Low when
night mode is set.
Hold time: Set the reaction time of changes in
brightness from 2 sec. to 30 sec.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents