Installation Tab - Sony SNC-CH115 User Manual

Date & time
Set the format of date/time and the separator. These
settings are applied to both Image 1 and Image 2.
Camera ID
Select the type of information displayed as Camera ID.
Set the Text string to be displayed.
Logo: Select an image file you want to use for Logo by
using the Browse... button, and click Upload to upload
the file.
Supported image file format: gif89a format (GIF
animation and transparent GIF format are not
supported.)
Maximun image size: 640 × 120
Number of horizontal pixels: An even number
Maximum file size: Approximately 50 KB
Notes
• Both Text and Logo cannot be used at the same time.
• Camera ID is applied to both Image 1 and Image 2.
• If the image size of the logo is larger than the image,
it cannot be displayed.
Image
Select whether to superimpose on Image 1 and Image 2
or not, set the font size and configure each item that
display position is assigned.
Superimpose
On/Off: When using the Superimpose function, select
On.
Font size: Set the font size.
Superimpose format
Set the items to superimpose according to the displayed
position. English one byte characters and symbols are
displayed. Available items are as follows:
• Off: Set not to superimpose.
• Text: Set to display a string that you want. You can
enter characters in the right free space.
36
Configuring the System — System Menu
• Date & time: Set to display date and time.
• Camera ID: Set to display Camera ID.
• Codec: Set to display the bit rate and frame rate.
• Zoom ratio: Set to display the zoom ratio.
• Camera direction: Set to display the name of a preset
position.
• Event: Set to display an event record.
Notes
• The items except for Off and Text cannot be set at the
same time.
• Depending on the length of the string you enter in
Text, the string display may crossover the other item.
In this case, change the display position or modify the
string.
• When Image 2 is turned on and Video Output is set to
On, the content set to be output from Video Output is
displayed. (SNC-ZB550/ZM550/ZM551)
OK/Cancel
See "Buttons common to every menu" on page 32.

Installation Tab

You can perform settings related to installation.
Display sample: SHC-CH120
Maximum image size
SNC-EB520/EM520/EM521
The maximum image size is 800 × 600. This maximum
setting cannot be changed.
SNC-CH115/CH120/CH160/DH120/
DH120T/ZB550/ZM550/ZM551
1280 × 720: Image will have an aspect ratio of 16:9, and
an image size up to 1280 × 720 can be specified for
the video codec.
1280 × 1024: Image will have an aspect ratio of 5:4, and
an image size up to 1280 × 1024 can be specified for
the video codec.
SNC-CH220/CH260/DH220/DH220T/
DH260
1920 × 1080: Image will have an aspect ratio of 16:9,
and an image size up to 1920 × 1080 can be specified
for the video codec.