Ip Filter - D-Link DCS-2630L User Manual

Section 4: Configuration
The IP Filter is a feature used to allow or deny certain IP addresses when accessing the camera.
Access List
Check this box to enable the IP Filter function.
Filtering:
Filter Type: Select whether to set the filter to Allow or to Deny connection
from the IP addresses listed.
IPv4 Filter List:
The current list of IPv4 addresses that are being filtered. Select a
line and then click Delete to remove that entry.
IPv6 Filter List: The current list of IPv6 addresses that are being filtered. Select a
line and then click Delete to remove that entry.
Add New Filter:
From the drop-down menu, select whether to add a single IP,
an entire subnet, or a range of IP addresses. Enter an IP address,
subnet, or IP range, then click Add to create a new filter.
Administrator IP
You can allow a single IP address to always have access to this
Address: camera, regardless of the IP filter rules being used, by enabling
this option and entering the IP address.
D-Link DCS-2630L User Manual

IP Filter

36