Operating Instructions; To Turn Off Gas To Appliance - Monessen Hearth CDV7 Installation And Operating Instructions Manual

Cdvsc7 series, cdv7 series, direct vent gas fireplace
Table of Contents

Advertisement

CDVSC7 & CDV7 Series Gas Fireplace
1. STop! Read the safety information above.
. This appliance is equipped with an ignition device which automatically lights the burner. Do not try to
light the burner by hand.
3. Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas,
STop! Follow "B" in the safety information on page 41. If you do not smell gas, go to next step.
4. Press the master switch to the "ON" (-) position. Within eight (8) seconds it will beep once. This indi-
cates the system is ready.
5. Press "ON " button. Sparker will spark and pilot flame will light.
6. Once pilot flame is established, the main burner flame will light automatically.
7. If the pilot will not stay lit after several tries, turn the master switch to "OFF" and call your service
technician or gas supplier.
oFF
FP1913
Switch box
8/08
1. Turn master switch to "OFF".
. Turn off all electrical power to the appliance if service is to be performed.
4

opeRaTInG InSTRuCTIonS

OFF
on
Command Center

To TuRn oFF GaS To applIanCe

opeRaTInG InSTRuCTIonS - SIGnaTuRe CoMManD
Master
Switch
ON
FP1914
Pilot w sparker
8/08
69D3011

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents