Troubleshooting; Self-Diagnosis Fault Code Indication - Yamaha YZF-R6(V) 2006 Service Manual

EAS27700

TROUBLESHOOTING

When the main switch is turned to "ON", the immobilizer system indicator light does not come on nor
flashes.
1. Check the fuses.
(Main, ignition, and backup)
Refer to "CHECKING THE FUS-
ES" on page 8-95.
OK ↓
2. Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 8-96.
OK ↓
3. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-91.
OK ↓
4. Check the entire immobilizer sys-
tem wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-77.
OK ↓
• Check the condition each of the im-
mobilizer system circuits.
Refer to "SELF-DIAGNOSIS FAULT
CODE INDICATION" on page 8-83.
EAS27720

SELF-DIAGNOSIS FAULT CODE INDICATION

When a system malfunction occurs, the fault code number is signaled by the immobilizer system indi-
cator light.
Fault
Part
code
51 IMMOBILIZER
UNIT
NG →
NG →
NG →
NG →
Symptom
Code cannot be
transmitted be-
tween the key and
the immobilizer unit.
8-83
IMMOBILIZER SYSTEM
Replace the fuse(s).
• Clean the battery terminals.
• Recharge or replace the battery.
Replace the main switch/immobilizer unit.
Properly connect or repair the immobilizer
system wiring.
Cause
1. Radio wave interfer-
ence caused by ob-
jects around the keys
and antennas.
2. Immobilizer unit mal-
function.
3. Key malfunction.
Action
1. Keep magnets,
metal objects,
and other immo-
bilizer system
keys away from
the keys and an-
tennas.
2. Replace the
main switch/im-
mobilizer unit.
3. Replace the key.