Sony MZ-B50 Operating Instructions Manual page 39

Error message
NO COPY
NO DISC
NO SIGNAL
P/B ONLY
PROTECTED
SORRY
TEMP OVER
TOC Edit
TR FULL
TrPROTECT
1)
LP2/LP4 stereo mode enables recording or playing at 2 or 4 times the normal recording or playing time.
Recording, playing, or editing of tracks recorded in this mode is possible only on components that
support LP2/LP4 stereo mode. This recorder does not support LP2/LP4 stereo mode.
Meaning/Remedy
• You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
, Use analog connection instead (page 17).
• You tried to play or record with no disc in the recorder.
, Insert an MD.
• The recorder could not detect digital input signals.
, Make sure that the source is connected firmly (page 16).
• You tried to record or edit on a premastered MD (P/B stands for
"playback").
, Insert a recordable MD.
• You tried to record or edit on a MD with the tab in the record-
protect position (page 42).
, Slide the tab back.
• You tried to erase the track mark at the beginning of the first track.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, for
example).
• You tried to press XPAUSE or TRACK MARK during synchro-
recording.
• Heat has built up in the recorder.
, Let the recorder cool down.
• The MD player is recording information (track start and end
position) from the memory to the disk.
, Wait until this process is completed. Do not expose the player
to physical shock, nor disrupt power supply.
• There is no more space for new data when you are editing the MD.
, Erase unnecessary tracks (page 28).
• You tried to record or edit on a track that is protected from erasing.
, Record or edit on other tracks.
• The track that you tried to edit was recorded in LP2/LP4 stereo
1)
mode.
39
-GB