Table of Contents
Advertisement
4. e e t. e _. 41.e _1. e e , e 4. e e 4. e • _. e ,
e e
_ e e e e _ _ e ,
e e , e e e e _ e e e e e e e _ e
Specialized Storage Areas
Your refrigerator has an Adjusti-Temp
TM
meat storage
To remove this drawer for cleaning:
drawer. This drawer is designed to provide a short term
storage area for fresh meats, cheeses and luncheon
• pull the drawer out until it stops
meats.
* lift the drawer up slightly and pull it out
The Adjusti-Temp
TM
Drawer is the top drawer in the
To replace the drawer:
fresh food compartment.
The temperature control for
this drawer is located on the shelf front above the draw-
° reverse above procedure
er. Slide the control left or right to achieve the desired
f
I
internal temperature of the drawer. The "cool" setting
[
For best results, keep this drawer closed tightly.
I
provides a temperature similar to that of the surrounding
...............
fresh food compartment. The "cold" setting provides a
lower temperature within the drawer which is recom-
mended when storing fresh meat, poultry or fish.
COOL
e_eeoee_e_oeo_e
The Crispers are ideal for storage of fruit and vegetables.
*Maytag Automatic Humidity
Controlsystemfeatures
a unique,
paten_
They are equipped with an automatic humidity control sys-
ed material called Shape Memory Polymer (SMP) that when laminate
tern.
to fabric, becomes
DIAPLEX.
DIAPLEX
is manufactured
b
Mitsubishi.
DiAPLEf
Automatic
Humidity
Control
.._,.,_,,._°._.,.,o
A fabric-like material* covers small air vents in the shelf
To remove a crisper drawer for cleaning:
insert above the crispers.
• pull out the crisper until it stops
This material controls the flow of moisture out of the crisper
• tilt the drawer front up and pull it out
to provide the optimum environment for your food. If a
food spill should occur on the air vent or fabric-like
To replace a crisper drawer:
material, wipe with a clean, damp cloth.
• align the drawer in the tracks
• lift the drawer front and slide in
[lllllllllllllllll]
I
FOrbe_tresults,keepthecrispet_tighayclOsed_
eeeee#e#e##eeee
The sealed cover of the top drawer serves as the lower refrigerator shelf.
To remove the cover:
To replace the cover:
• lift the front edge of the shelf
* set the rear bars on the support
• pull the shelf straight out
• push the shelf back until the front edge can be lowere
into place
Advertisement
Table of Contents
