Reception Into Memory; Printing A Fax From Memory - Brother MFC-830 Owner's Manual

Reception into Memory

As soon as the paper cassette becomes empty during fax reception, the screen will display "CHECK
PAPER"; please put some paper in the paper cassette. (See Loading Paper in Preparation and
Simple Use Guide.)
If the MEMORY RECEPTION switch is ON at this time...
The current fax reception will continue, with the remaining page(s) being stored in memory, subject
to available memory. Subsequent incoming faxes will also be stored into memory until the memory
is full, following which no further incoming fax calls will be automatically answered; all data will
be printed as soon as fresh paper is put in the paper cassette, then press Start.
If the MEMORY RECEPTION switch is OFF at this time...
The current fax reception will continue, with the remaining page(s) being stored in memory, subject
to available memory. Subsequent incoming fax calls will not be automatically answered until fresh
paper is put in the paper cassette. The last fax received will be printed as soon as fresh paper is put
in the cassette, then press Start.
1
Press Menu, 1, 2, 6. The screen displays
2
to select ON or OFF, and press Set when
Use or
the screen displays your selection.
3
Press Stop to exit.

Printing a Fax from Memory

If you have fax storage ON for remote retrieval, you can still print a fax from the machine's memory
when you are at your machine: (See Setting Fax Storage in Chapter 9.)
1
Press Menu, 1, 7, 4.
2
Press Start.
3
After all the data saved in the memory is printed out. Press Stop.
28
Chapter 3
6.MEM.RECEIVE