Basic Telephoning; Accepting A Call Via The Base Station; Accepting A Mobile Phone Call; Making A Call Via The Base Station - Sennheiser VMX OFFICE Instruction Manual

Basic telephoning

Provided the headset is switched on and
in the transmission range of the base
station and/or the mobile phone (see
page 18), you can accept and make calls.

Accepting a call via the base station

When you receive a call either via your
fixed line phone or PC phone
a ring tone in the headset. In addition,
the headset LED
»
LED flash rapidly.
To accept the call from a fixed line phone
when the headset
on:
Press
– the hook button
call from the phone or PC or
– the PHONE button
answer calls from the phone.
A wireless link is established between
the headset and the base station.
If no automatic handset lifter is
installed to your fixed line phone, lift
the handset manually.
The link to the phone is established.
If an automatic handset
lifter is installed to your
phone, it automatically lifts
the handset as soon as you
press the hook button
to accept the call.
1)
Only if you use a handset lifter with ring
tone detection or the TCI 01 box or the
Sennheiser Communications USB call con-
trol software.
1)
, you hear
and the PHONE
is already switched
to answer any
·
( ) to
Start to talk.
To accept the call when the headset
is switched off:
Open the microphone boom
The headset is switched on and the
call is answered immediately without
any further action (there might be
a delay depending on the type of
phone you use).
Put on the headset.
Start to talk.

Accepting a mobile phone call

When you receive a call via your mobile
phone, you hear a different ring tone in
the headset. In addition, the headset
LED flashes rapidly.
Press the hook button
A wireless link is established between
the headset and the mobile phone.
Start to talk.
If no ring tone is heard in the headset:
Press and hold the hook button
approx. two seconds.
The headset will then answer the
mobile phone call.

Making a call via the base station

Press the PHONE button
briefly press the headset hook
button .
A wireless link is established between
the headset and the base station.
.
.
for
·
( ) or
15