Operating The Vmx 100; Telephoning With The Vmx 100 - Sennheiser VMX 100 Instruction Manual

Operating the VMX 100

Telephoning with the VMX 100

Accepting an incoming call
Make sure the headset is paired to your mobile phone
(see "Pairing the headset to mobile phones or other Bluetooth
devices" on page 11).
When you receive a call, you hear a ring tone
in the speaker
quickly. To accept the call if the headset is
already switched on:
Press the hook button
button ¿.
A beep is heard in the headset.
Start to talk.
To accept the call if the headset is not
switched on:
Open the microphone boom ³.
The headset is switched on and the call is answered immediately
without any further action.
Put the headset on your ear.
Start to talk.
Rejecting an incoming call
Press and hold the hook button
ringing until a beep is heard in the headset.
The ring tone stops. Depending on the mobile phone settings, the
call is either rejected or transferred to a voice mailbox.
Making a call
Dial the number on your mobile phone as usual.
»
and the LED
·
´
flashes blue
or the volume
·
while the mobile phone is
· »
¿
´
13