Channel Selection - Icom iF3230D Series Instruction Manual

3
BASIC OPERATION

Channel selection

■
Several types of channel selections are available. Methods
may differ, depending on your system set up.
NON-ZONE TYPE:
To select the desired operating channel:
Push [CH Up] or [CH Down].
➥
Push one of [MR-CH 1] to [MR-CH 4].
➥
Push one of these keys, [Prio A], [Prio B], [Prio A (Re-
➥
write)] or [Prio B (Rewrite)].
ZONE TYPE:
To select the desired operating channel:
Push [Zone], then push [CH Up] or [CH Down].
➥
VOTING OPERATION:
The transceiver automatically starts scanning when a zone,
specified for the voting operation, is selected.
The voting scan detects the S-meter of the repeater and au-
tomatically selects the strongest station.
9
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning
ON the power, the transceiver automatically starts scanning.
Scanning stops when a signal is received.