NOTE: If computer program changes are required, refer to the computer programming section of the
manual supplied with the dryer.
should be
ALL
J. PREOPERATIONAL INSTRUCTIONS
NON-COIN MODELS
NOTE: Pressing keyboard (touch pad) key A, B, C, D, or F will also start the dryer. The
six (6) preprogrammed drying cycles A through F have been stored in the microprocessor
controller (computer) memory. Refer to the Programming Manual supplied with the dryer for
more specific operating instructions.
NOTE: The dryer can be stopped at any time by opening the main door or by pressing the STOP
red key. To restart the dryer, press the START
key (i.e., E).
NOTE: Selection (settings) changes can be made at any time during the drying cycle by pressing the
STOP
at which time a new cycle selection can be made.
ALL
red key twice. The light emitting diode (L.E.D.) display will return to REAdY
green key or a preprogrammed cycle
26