Control Panel
Reset
You can reset the calibration parameters back to those set at the factory.
a
Press + or - to choose Color Correction. Press OK.
b
Press + or - to choose ColorCalibration. Press OK.
c
Press + or - to choose Reset. Press OK.
d
Press + to choose Reset.
Auto Registration
Registration
You can adjust the print position of each colour automatically.
a
Press + or - to choose Color Correction. Press OK.
b
Press + or - to choose Auto Regist.. Press OK.
c
Press OK to choose Registration.
d
Press + to choose Yes.
Manual Registration
When you manually set the colour registration, you need to print the color registration chart. Then you are
required to set parameters to the machine in accordance with the instruction of the color registration chart.
Print Chart
You can print the color registration chart to manually check the registration of the colours.
a
Press + or - to choose Color Correction. Press OK.
b
Press + or - to choose Manual Regist.. Press OK.
c
Press + or - to choose Print Chart. Press OK.
Set Registration
You can correct the colour registration manually.
a
Press + or - to choose Color Correction. Press OK.
b
Press + or - to choose Manual Regist.. Press OK.
c
Press + or - to choose Set Registration. Press OK.
d
To set the colour registration, follow the instructions on Color Registration Chart.
3
3
3
3
3
3
3
80