Print Quality - Brother HL-4150CDN User Manual

Driver and Software

Print Quality

You can choose the following print quality settings.
 Normal (600 x 600 dpi)
600600 dpi. Recommended for ordinary printing. Good print quality with reasonable print speeds.
 Fine (2400 dpi class)
2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs. Since
the print data is much larger than in normal mode, processing time / data transfer time and printing time
will be longer.
Note
The print speed will change depending on what print quality setting you choose. Higher print quality takes
longer to print, while lower print quality takes less time to print.
Color/Mono
You can change the Colour/Mono settings as follows:
 Auto
The machine checks the content of your documents for colour. If colour is detected, it prints in colour. If
no colour content is detected, it prints in monochrome. The total printing speed may become slower.
 Color
When your document contains colour and you want to print it in colour, select this mode.
 Mono
Select this mode if your document has only black and greyscale text and/or objects. If your document
contains colour, selecting Mono mode prints your document in 256 levels of grey.
Note
• Sometimes a document can contain colour information even if it appears to be monochrome (for example,
grey areas can actually be made from a combination of colours).
• If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a colour document, the
print job cannot be completed. You can choose to start the print job again in Mono mode, as long as black
toner is available.
2
2
2
30