Lenovo B50-10 Hardware Maintenance Manual page 46

Lenovo B50-10 Hardware Maintenance Manual
42
Figure 5. Removal steps of hard disk drive (continued)
Detach the HDD connector in the direction shown by arrow 2. Remove the
hard disk drive from the slot in the direction shown by arrow 3.
When installing: Make sure that the HDD connector is attached firmly.
Remove the screws 4, and then take out the metal frame.
Step Screw (quantity)
M3 × 3 mm, Phillips head, nylok-coated (4)
4
HDD BRK TO HDD
Color Torque
Silver 3.0+/-0.3kgf/cm