Lenovo B50-10 Hardware Maintenance Manual page 41

Figure 3. Removal steps of base cover (continued)
Remove the screws 2 and 3 from the bottom.
Step Screw (quantity)
M2.5 × 6 mm, Phillips head, nylok-coated (10)
2
LOW TO UPPER
M2 × 2 mm, big flat head, nylok-coated (2)
3
LOW TO UPPER
Use a plastic prying tool to aid in separation, then remove the base cover in the
directions shown by arrows 4 and 5.
Lenovo B50-10
Color Torque
Black 3.0+/-0.3 kgf/cm
Black 1.85+/-0.15 kgf/cm
37