Lenovo B50-10 Hardware Maintenance Manual page 42

Lenovo B50-10 Hardware Maintenance Manual
38
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
KCC label
a
BIS label for India
b
c WLAN/BT for Malaysia/Indonesia
d WLAN/BT for South Africa
e WLAN/BT for Israel/US/CA/TW
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figures:
h
a
c
b
f
e e
WLAN/BT for Brazil
f
g
Indonesia D side label
h Rating label
i Rating label
j GML Label
g
i
j
c d d
f