Safety Wire Installation - Toa HX-7B Operating Instructions Manual

10. SAFETy WIRE INSTALLATION

Be sure to always use safety wire when installing speaker
systems.
Note
Safety wires, shackles, and other suspension parts are not
supplied with the speaker systems, and must be prepared
separately.
Be sure to follow all instructions regarding safety wire
installation. If not correctly followed, speakers could fall,
potentially resulting in personal injury.
• Use safety wire that is strong enough to suspend the
full weight of the components to be installed.
• Attach a shackle to the rear angle bar and install
suspension bolts to the wall or ceiling as shown in the
figure at right.
• Only install speaker systems in locations capable of
structurally supporting the weight of the speakers and
their mounting brackets.
14
WARNING
[Wall Mounting Example]
In this example, the optional HY-VM7B and
HY-WM7B brackets are used.
Weight: 39.8 kg (87.74 lb)
Shackle
Rear angle bar
Note
Attach at least 2 safety wires to the shackle,
then secure them to the wall as shown above.
Safety wire
Wall
Make as short as
possible so as not
to slacken.