Raid Drives Management; Viewing Raid Array Configurations - MSI K8N Neo3 MS-7135 User Manual

MS-7135 ATX Mainboard
There is an application called NVRAIDMAN which helps you perform the following
tasks of nVDIA RAID.

• Viewing RAID Array Configurations

View an array configuration (mirrored, striped, mirror-striped, JBOD, or any sup-
ported combination)
• Setting Up a Spare RAID Disk
• View free and/or dedicated free disks
• Designate a free disk to a particular array
• Rebuilding a RAID Mirrored Array
• Rebuild a broken mirrored array
• W atch the progress of rebuilding an array
Viewing RAID Array Configurations
To view your RAID configuration from W indows, launch the NVRAID Management
utility by double-clicking NvRaidMan.exe (the default location of NvRaidMan.exe is
in \\nVidia\System\CK804\IDE\W inXP\raidtool or
\\nVidia\System\CK804\IDE\Win2K\raidtool of the setup CD accompanied with your
mainboard).
The RAID configuration information appears in the right-side pane, as shown below.
MSI Reminds You...
The information in the figures in this part may very from what it is shown
in your system.
NVRAID M irrored Array
The figure below shows an example of a two hard drive mirrored array using iden-
tical 55.90 GB IDE hard drives (ST360015A), where one drive is configured as
Master and the other drive is configured as Slave. The total hard disk space used is
55.90 GB. (1.1 GB = 1,073,741,824 bytes)
B-12

RAID Drives Management