Tv Guide On Screen™ Faqs - Toshiba 32HL95 Owner's Manual

TV Guide On Screen™ FAQs
The following are frequently asked questions about the TV Guide On Screen
problem.
SETUP
1. Q: What if I move and my ZIP code or postal code
changes?
A: Highlight SETUP in the Service Bar. Press z to highlight
Change System Settings (page 54), and then press ENTER.
Follow the on-screen prompts to enter new information
(see Chapter 3 for details). It can take up to 24 hours to
receive new data.
2. Q: What if I change my cable hook-up to antenna or vice
versa?
A: Highlight SETUP in the Service Bar. Press z to highlight
Change System Settings (page 54), and then press ENTER.
Follow the on-screen prompts to enter new input
information and rescan channels for the new input (see
Chapter 3 for details).
3. Q: What if I change cable boxes?
A: Highlight SETUP in the Service Bar. Press z to highlight
Change System Settings (page 54), and then press ENTER.
Follow the on-screen prompts to enter new input
information and rescan channels for the new input (see
Chapter 3 for details).
4. Q: I used to have a cable box, but now I get direct cable.
What do I do?
A: Highlight SETUP in the Service Bar. Press z to highlight
Change System Settings (page 54), and then press ENTER.
Follow the on-screen prompts to enter new input
information and rescan channels for the new input (see
Chapter 3 for details).
5. Q: If I add a recorder or change my cable service, how do I
change my Setup information?
A: Highlight SETUP in the Service Bar. Press z to highlight
Change System Settings (page 54), and then press ENTER.
Follow the on-screen prompts to enter new information
(see Chapter 3 for details). It can take up to 24 hours to
receive new data.
6. Q: Why does it take up to 24 hours for the TV Guide
™
On Screen system to be ready for use?
A: The initial setup process consists of finding the stations in
your area that carry the TV Guide On Screen
and tuning to those stations to receive the setup and
listings data.
82
Chapter 10: Troubleshooting
7. Q: I had a power outage. Do I need to go through initial
8. Q: How do I connect the G-LINK
9. Q: When will I be able to view my TV program listings and
10. Q: What should I do if I cannot complete initial setup?
11. Q: If I make a mistake during setup, how do I go back to
12. Q: What if the channel number is not visible on my cable
13. Q: Why won't my VCR turn on?
™ system data
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
™
system. The answers represent the most likely solutions to the
setup of the TV Guide On Screen
A: No. The information you entered is stored in the TV Guide
™
On Screen system memory.
Note: For Cable box users, the TV must be OFF and the Cable
box must be left ON for the TV Guide On Screen™ system to
receive channel line-up information.
™
the G-LINK input on the TV?
A: See Chapter 2: Connecting your TV in this manual.
You also can refer to the TV Guide On Screen
during VCR or Cable box setup.
use other TV Guide On Screen
A: The TV Guide On Screen ™
within 24 hours of initial setup.
A: If you are unable to complete initial setup using the owner's
manual and the on-screen prompts, please call Toshiba's
National Service Division at 1-800-631-3811.
the previous step?
A: Complete the remaining setup steps. When "Confirming
Your Settings" appears, select "No, repeat setup process."
Follow the on-screen prompts and input the correct
information.
box?
A: Your cable box may be defaulting to a clock or time display
once the channel changes. Watch the box carefully when
testing the cable box brand code to see if the channel
changes to 09.
A: There are several possibilities:
a) An incorrect or "no VCR" code was entered during the
™
TV Guide On Screen initial setup. Press TV GUIDE on
the remote control, and then press • to highlight SETUP.
Press z to highlight "Change system settings," and then
press ENTER. Follow the on-screen prompts to select the
correct VCR information.
™
b) Make sure the G-LINK (IR blaster) cable is connected
correctly (see page 21).
c) The VCR record timer is on. Turn off the timer.
d) The wired remote VCR is incompatible.
™ system again?
™ (IR blaster) cable to
™ prompts
™
system features?
system will be ready for use