About The Connection Illustrations; Connecting A Cablecard - Toshiba 32HL95 Owner's Manual

About the connection illustrations

You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in
this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those
illustrated herein. For details on connecting and using your specific devices, refer to each device's owner's manual.

Connecting a CableCARD™

This digital television is capable of receiving analog basic, digital
basic, and digital premium cable television programming by
direct connection to a cable system providing such
programming.
A security card (such as a CableCARD™), provided by your
cable operator, is required to view encrypted digital
programming.
Certain advanced and interactive digital cable services (such as
video-on-demand, a cable operator's enhanced program guide,
and data-enhanced television services) will not work with the
use of a CableCARD™ and may require the use of a separate
set-top box from your cable operator.
For more information, call your local cable operator.
You will need:
one CableCARD™ (contact your cable operator)
digital cable subscription service (contact your cable
operator)
TV lower back panel
From digital Cable service
(connect to ANT 1 only)
This cable should be connected to ANT 1 terminal directly. If you connect
the cable via a VCR, the TV may not receive the signals correctly.
________
CableCARD™ is a trademark of Cable Television Laboratories, Inc.
12
Chapter 2: Connecting your TV
1. Connect your digital Cable TV cable to ANT-1.
2. With the front of the CableCARD™ facing up, insert it
3. After the CableCARD™ is inserted, a CableCARD™
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
To view encrypted digital channels:
into the CableCARD™ slot on the back of the TV (see
illustration below left).
option appears in the Applications menu, with
informational screens provided by your CableCARD™
service. See page 40 for additional information.
CableCard Connected -- Acquiring
channel information.
CableCard services will only operate with
cable signal connected to Antenna 1.
OK
Note:
• Always use the EJECT button to remove the
CableCARD™. Never remove the CableCARD™
carelessly.
• Never insert any object or card (including, without
limitation, a PCMCIA card) other than a CableCARD™
into the CableCARD™ slot.
• Always make sure the CableCARD™ is facing the correct
direction.
• Connect the cable for your digital cable TV service to
ANT-1 only.
• A digital cable subscription is required to use a
CableCARD™. Contact your Cable company for
information.
• When using a CableCARD™, channel programming
(page 37) is unnecessary because the CableCARD™
automatically loads the cable channel list into the TV's
channel memory.
• The CableCARD™ will take several minutes to "pair" with
the TV and download its channel information.
CableCARD™ information and channels will not be
available until this process is completed.
Applications
TV Guide On Screen Conditional Access
Digital CC/Audio Selector CableCARD(tm) Pairing
CableCARD
CableCARD(tm) Status
Network Setup
Navigate Select CH RTN Back EXIT Exit