Viessmann vitodens Technical Manual page 96

3.5 Installation accessories
DHW cylinder
200
Accessories for the installation of Vitodens 200 and 300 (up to 35 kW)
Connection between Vitodens and the DHW cylinder
300
Connection set for wall mounted DHW cylinder
Vitocell W 100
comprising:
H Cylinder temperature sensor (not shown)
H Heating water connection pipes
H Primary air vent valve
Installation on finished walls
DHW cylinder installed either on the l.h. or the r.h. side of Vitodens
Connection set for DHW cylinder installed below the boiler
Vitocell W 100 with connection pipes
comprising:
H Cylinder temperature sensor
3 H Heating water connection pipes
H Secondary side connections
Installation on finished and unfinished walls
Connection set for DHW cylinder installed adjacent to the boiler
Vitocell W 100 and 300
comprising:
H Cylinder temperature sensor
H Compression fittings
DHW cylinder installed either on the l.h. or the r.h. side of Vitodens
Compression version
Soldered version
96 VITODENS