Batteries Used For Dsc350 Digital Camera - Vivitar DSC350 User Manual

Batteries used for DSC350 Digital Camera

Attention : The internal memory is only available for about 6 photos (HALF *), you have
to use the CF memory card for most time.
• Insert 4 pcs of AA alkaline batteries into the battery compartment. Slide the power switch
to On position for 1s. It will turn on the camera and the status LCD is On.
• You cannot power up the camera without the batteries.
• If battery power is cut off, some of the settings are reset. Eg. The date and time
will be reset to 01/01/00 12:00.
• As the camera is powered on, the LCD monitor is off to save battery power. Press the
DISP button to turn it on if you need to see the live image.
• The battery icon will blink if battery power is too low (<4V).
Please replace with new alkaline batteries as soon as possible. The camera will not use the
USB cord power from the PC. So it is not recommended that you use it as a web cam.
Slide and lift open the battery compartment cover and insert 4XAA Alkaline batteries
with correct polarities. Then close the battery compartment cover.
7