Appendix N Wireless Lan Manager - ZyXEL Communications G-3000H User Manual

This appendix shows you how to install and use the Wireless LAN Manager.
The Wireless LAN Manager (WLM) software simplifies SNMP based firmware and
configuration file upgrades on the AP. WLM is an Element Manager System (EMS) plug-in
for SNMPc management software. The Wireless LAN Manager is referred to here as the EMS.
The EMS uses ZyXEL's proprietary Management Information Base (MIB). The proprietary
MIB file is included on the CD with the EMS. You can also find it in the zipped file that
contains the current firmware file. You can download the current firmware from
www.zyxel.com.
System Requirements
These are the system requirements for operating the EMS software.
• CPU: Intel Pentium 4, 1.6 GHz or above
• Memory (RAM): 1 GB or more
• Hard Disk free space: 20 MB or more
• Screen Resolution: 1024x768 pixels
• Ethernet Adaptor: 10/100 Mbps
• Operating System: Windows 2000 (with service pack 1), Windows XP or Windows
Server 2003 and all using NTFS file system.
• Castle Rock's SNMPc 7.
EMS Installation Overview
The following gives an overview of what you need to do to install the EMS:
1 Install SNMPc. See the documentation that comes with your SNMPc for information.
2 Install the EMS.
3 Add custom MIB files in SNMPc.
4 Locate device(s) that you want the EMS to manage.
Installing the EMS
Follow the steps below to install the EMS server on a computer.

Appendix N Wireless LAN Manager

Wireless LAN Manager
G-3000H User's Guide
Appendix N
281