Key Features; Wireless Lan Overview; Output Power Management - ZyXEL Communications ZyAir B-1000 Quick Installation Manual

Fill in the fields in the last wizard configuration screen.
3.
If you changed the ZyAIR's IP address, you must use the new IP address if you
Change the wireless parameter settings in the wireless stations to match those of the ZyAIR. Refer
4.
to the user's guide for your wireless adapter.

5 Key Features

This section shows you how to configure some of the advanced features of the ZyAIR.
Refer to your User's Guide for more information on ZyAIR configurations.

5.1 Wireless LAN Overview

This section introduces the wireless LAN and some basic configurations. A wireless LAN can be as simple
as two computers with wireless adapters communicating in a peer-to-peer network or as complex as a
number of computers with wireless adapters communicating through access points (APs) which bridge
network traffic to the wired LAN.

5.2 Output Power Management

Output Power Management is the ability to set the level of output power.
There may be interference or difficulty with channel assignment when there is a high density of APs within
a coverage area. In this case you can lower the output power of each access point, thus enabling you to
place access points closer together.
ZyAIR B-1000 v. Secure Wireless LAN Access Point
2
want to access the web configurator again.
Select Get automatically to have the
ZyAIR obtain an IP address from a DHCP
server.
You must know the IP address assigned to
the ZyAIR (by the DHCP server) to access
the ZyAIR again.
Select Use fixed IP address to give the
ZyAIR a fixed, unique IP address. Enter a
subnet mask appropriate to your network
and the gateway IP address if applicable.
Click Finish.
12