Quick Reference - Lorex LHV2000 Series Quick Mobile Manual

2
Find your Device ID
The Device ID is printed on a label on the top panel of the DVR.
Device ID: xxxxxxxxxxx
Record your information below:
DEVICE ID:
Troubleshooting
If you are having trouble connecting, try the
following:
• Restart the DVR using the power switch
• Ensure the DVR is connected to the router
using an Ethernet cable and then restart the
DVR
• Double check the Username, Password, and
Client Port
• Ensure your DVR has the latest firmware
• For slower Internet connections, reduce
bitrate settings to CIF, 10FPS, 96 or
128kbps. See instruction manual at
www.lorextechnology.com/support

Quick Reference

Default access information:
• Default user name: admin
• Default password: 000000
See the label on top of your DVR for
your Device ID
Default system ports:
Information in this document is subject to change without notice. As our products are subject
• HTTP Port: 80
to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to
• Client Port: 35000
modify product design, specifications and prices, without notice and without incurring any
If you have forgotten your password,
obligation. E&OE © 2015 LOREX. All rights reserved.
contact Lorex technical support
LHV2000_SERIES_QNG_EN_R1.indd 2
Quick PC/MAC Guide
Need Help?
Visit www.lorextechnology.com/support
It's all on the Web
Software and complete instruction
manual available on:
www.lorextechnology.com/support
LHV2000_SERIES_QNG_EN_R1
Connecting on PC or Mac
3
a
Download and install the client software.
• PC Users: Download and install the Client
Software for PC from
www.lorextechnology.com/support.
• Mac Users: Download and install the Client
Software for Mac from
www.lorextechnology.com/support. Double click
to extract the software. Then, drag the software to
Applications.
Once installation is finished, double-click the FLIR
b
™
Cloud Client icon (
) on the desktop or
Applications list.
c
Log into the Client Software using the Client Software
user name (default: admin) and password (default:
admin) and then click Login.
User Name: admin
Password: admin
d
Click Add Device
Congratulations! You can now connect over the Internet to view
and playback video on your computer.
NOTE: PC/Mac setup is
not required to connect on
a smartphone or tablet.
See reverse for
15 Minutes
smartphone/tablet setup.
e
Enter the following information:
1 Device Name: Choose a name for your system of your choice.
2 Device ID: Manually enter the Device ID printed on the label.
Client Port: Enter the Client Port (default: 35000).
3
User Name: Enter the DVR's User Name
4
(default: admin).
5 Password: Enter the DVR's Password
(default: 000000).
EXAMPLE
1
2
3
4
5
Click Add
You will be prompted to change the DVR
f
password. Click OK.
g
Enter a new 6 character password and tap
OK. This password will be used to connect to
your system from now on.
h
Click then .
Click and drag Default Group to the display
i
window to open your cameras in live view.
2/23/2015 11:53:42 AM