Table of Contents
Advertisement
Connection
RS-485 communication control
Connecting to RS-485 Control Cable
Using a RS-485 communication, it will be able to control the OSD menu at the
SAMSUNG TECHWIN System Controller or DVR.
(1) The case which it controls from the PC
Using a RS-485 converter, It connects to RS-485 control cable outside
camera and serial cable
EX) SERIAL PORT OF THE PC(COM1) → SERIAL CABLE → RS-485 CONVERTER →
RS-485 CONTROL CABLE
(2)The case which it controls from the DVR or System Controller
It connects the RS-485 control cable in the connection terminal of 485 control
boards which are connected with the DVR or System Controller.
485 Control Board Connection Port
(+)...CONNECTION...TERMINAL
(-)...CONNECTION...TERMINAL
* RS-485 Communication establishment initial value
Item
Camera ID
BAUD RATE
Initial value
1
9600
Notes
• W hen you construct external control systems for a camera control, please use to
the SAMSUNG TECHWIN PROTOCOL or PELCO-D PROTOCOL.
• W hen you connecting to RS-485 control cable, please peel off the outer skin inside
the RS-485 control cable.
• I n case of SCC-101 connection, change communication mode to 『8-E-1』 at
『Communication configuration』menu. (For more information, refer to SCC-101
manual.)
14
COLOR DOME CAMERA
CONTROL CABLE
SPEC
WHITE (TRX+)
RS-485+
BLCAK (TRX-)
RS-485-
RS-485 Control Port
WHITE...(TRX+)
BLACK...(TRX-)
UART MODE
RET PKT
8-NONE-1
ENABLE
User's Manual
Using Coaxial Communications
• Coaxial Communications System
• OSD Control method
Controller Button
Camera Button
IRIS OPEN
SET KEY
JOYSTICK UP
UP KEY
JOYSTICK DOWN
DOWN KEY
JOYSTICK LEFT
LEFT KEY
JOYSTICK RIGHT
RIGHT KEY
Matrix / DVR
– Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
Notes
• I f the camera is controlled through coaxial communication, please use a video amp
intended for coaxial communications. Regular video amps do not transfer coaxial signals.
COLOR DOME CAMERA
Distance
Recommended Cable Specification
300m
3C2V(RG-59/U)
450m
5C2V(RG-6/U)
600m
7C2V(RG-11/U)
15
User's Manual
Advertisement
Table of Contents
