Table of Contents
Advertisement
Operating Your Camera
Press the Function Setup switch.
3)
4) Use the Function Setup switch to move
to a desired letter and select the letter
by pressing the Function Setup switch.
Repeat this to enter multiple letters.
You can enter up to 15 letters.
5) Enter a title, move the cursor to 'POS' and press
the Function Setup switch. The entered title
appears on the screen. Select the position to
display the title on the screen by using the
Function Setup switch and press the Function
Setup switch. When the position is determined,
select 'END' and press the Function Setup switch
to return to the SPECIAL menu.
Notes
• W hen the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even
if you enter one.
• O nly English is available in this mode.
• I f you move the cursor to CLR and press the Function Setup switch, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function
Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to
be inserted and then press the Function Setup switch.
SYNC : In areas where the supply is at 60Hz, you can
synchronize the output phase of multiple cameras
using the power synchronization function (Line-
Lock) without using a synchronization signal
generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
26
COLOR DOME CAMERA
CAMERA TITLE SETUP
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
← → C L R P O S E N D
FRONT DOOR
User's Manual
Notes
• W hen using AC power at 60Hz frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
MOTION DET :
This product has a feature that allows you to observe
movement of objects in 8 different areas on the screen,
and the words 'MOTION DETECTED' appear on the screen
when movement is detected.
you can monitor activity more efficient.
... 1) When the SPECIAL menu screen is displayed, press the
Function Setup switch so that the arrow indicates 'MOTION DET' .
... 2) ... S et up the mode using the Function Setup switch.
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, motion
detection sensitivity is increased to recognize even small movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL→SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is
sequentially selected as brown, orange, blue, cyan, yellowish green, yellow
and red.
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY AREA SETUP
1. AREA
2. MODE
3. MASK COLOR
4. MASK TONE
5. TOP
6. BOTTOM
7. LEFT
8. RIGHT
9. RETURN
1) ... When the SPECIAL menu screen is displayed, press the Function Setup switch so that
the arrow indicates 'PRIVACY'.
... ... 2) ... Set up the mode using the Function Setup switch.
COLOR DOME CAMERA
AREA1
OFF
GREEN
1
39
79
13
51
27
User's Manual
Advertisement
Table of Contents
