Oregon Scientific RMR686P User Manual page 8

will activate for approximately 5-seconds.
The projection feature has many user-selectable adjustments.
Projector Features
Feature Effect
Adjustable Rotates the
Projection projection 180°
FOCUS Focuses projection
Knob
[ ]
Rotation of projection Dial M rotates projection
IMAGE
allows user to place
ROTATION clock in conventient
KNOB
Note : When the unit is receiving RF clock signal or searching for
remote sensor, the projected time may not be updated. The projected
time will resume normal once the reception or search is finished.
HOW TO USE THE PROJECTOR
POWER ADAPTER
AC/DC 3.0V power adapter is used to the power supply of the
Projection Light.
To install the adapter:
1. Insert adapter into jack at the bottom of the unit.
2. Plug the adapter into an electrical wall outlet.
Instructions
Tilt swivel projection
housing O to alter
the direction of
projection
Rotate Dial K to focus
projection
The Continuous Projection will only be activate when the power
adapter is properly connected to the unit and an electrical wall
outlet. Once the adapter has been plugged into the unit and an
electrical wall outlet, slide Button L to the ON position to activate
the continuous projection feature. To turn off the continuous
projection feature, slide Button L to the left OFF positon.
PRECAUTIONS
This product is engineered to give you years of satisfactory service
if you handle it carefully. Here are a few precautions:
1. Do not immerse the unit in water.
2. Do not clean the unit with any liquid containing alcohol,
detergent, abrasive or corrosive materials. They may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction,
shorter electronic life span, damaged battery and distorted parts.
4. Do not tamper with the unit's internal components. Doing so
will invalidate the warranty on the unit and may cause
unnecessary damage. The unit contains no user-serviceable parts.
5. Only use fresh batteries as specified in the user's manual. Do not
mix new and old batteries as the old ones may leak.
6. Always read the user's manual thoroughly before operating the unit.
7. Note:No rechargeable batteries should be used in this product.
Only use the type of battery as specified.
8