Specifications - Panasonic VL-SVN511 Series Operating Instructions Manual

9.1 Cleaning
Wipe the product with a soft, dry cloth.
For excessive dirt, wipe the product with a slightly damp
cloth.
Important:
R Do not use any cleaning products that contain
alcohol, polish powder, powder soap, benzine,
thinner, wax, petroleum, or boiling water. Also do
not spray the product with insecticide, glass
cleaner, or hair spray. This may cause a change
in colour or quality of the product.

9.2 Specifications

Main monitor (VL-MVN511)
Power source Power supply unit (VL-PS240/
VL-PS241)
24 V DC, 0.5 A
Power Standby: approx. xx W
consumption
During operation: approx. 10 W
Dimensions
Approx. 186´161´23.5
(mm) (height ´
(excluding protruding sections)
width ´ depth)
Mass (weight) Approx. 485 g
Operating Ambient temperature: approx.
environment 0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 5 inches, WQVGA
display
Talking method Hands-free
Installation Wall mount (mounting bracket
method supplied)
Frequency Wi-Fi: (IEEE 802.11 b/g/n
range 2.4 GHz)
Option output (A Rated load:
contact)
24 V AC/DC, 0.3 A or lower
Minimum applicable load:
5 V DC, 0.001 A
(Output when there is a call from
the doorphone (page 13).)
Power supply unit (VL-PS240/VL-PS241) (indoor use
only)
Power source Input: 220-240 V AC, xx A,
50/60 Hz
Output: 24 V DC, 0.6 A
Dimensions
VL-PS240: Approx. 116´100
(mm) (height ´
´54
width ´ depth)
VL-PS241: Approx. 104´100
´54
(excluding protruding sections)
Mass (weight) VL-PS240: Approx. 230 g
VL-PS241: Approx. 215 g
Operating Ambient temperature: approx.
environment 0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Installation VL-PS240: Attach to DIN rail
method
Relay box (VL-RLY1)
Power source Power supplied by the main
monitor
Output: xx V DC, xx A
Dimensions
Approx. 92´78´38 (excluding
(mm) (height ´
protruding sections)
width ´ depth)
Mass (weight) Approx. 130 g
Operating Ambient temperature: approx.
environment 0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Installation Attach to DIN rail
method
Doorphone (VL-V555)
Power source Power supplied by the main
monitor
xx V DC, xx A
Dimensions
Approx. 169´118´30 (excluding
(mm) (height ´
protruding sections)
width ´ depth)
Mass (weight) Approx. 395 g
Operating Ambient temperature: approx.
environment -10 °C to +50 °C
Relative humidity
(non-condensing): up to 90 %
Viewing angle Horizontally: approx. xx°
Vertically: approx. xx°
Installation Surface mount (mounting base
method supplied)
Minimum 1 lx
illuminance
(within approx. 50 cm from the
required
camera lens)
Lighting method LED lights
IP rating
IP54
IK rating Compliant with IK07
*1 Water resistance is only assured if the doorphone is
installed correctly according to the instructions in the
Installation Guide, and appropriate water protection
measures are taken.
Note:
R Design and specifications are subject to change
without notice.
9. General information
*1
27